A Global Silicon Electronics, Inc. Company
CipherShield Collateral Dual Keys 256-bit AES RAID 0 SSD FIPS 140-2 Level 2 HIPAA USB 3.2 Gen 2/eSATA Hardware Encrypted External Desktop Drive
WARNING for California resident
Available In Price Model
8TB $1699.99 CSE8TSDRG2KKC
15TB $2899.99 CSE15TSDRG2KKC

Product Description

Now with a USB 3.2 Gen 2 interface capable of transferring files at the speed of up to 10 Gbps, it takes advantage of the faster speed of the newer generation of SSD drive. You can now transfer files at twice the speed of the previous generation of USB 3.0 (USB 3.2 Gen 1). Faster transfer speed saves you time and money and makes it painless to transfer large files. RAID 0 striping with 2x 2.5″ gives a larger capacity with lighter weight and lower power consumption than our 3.5″ base RAID. It is possible to use power from the USB port without using the power adapter. Using metal alloy case, heat is easily dissipated and with less plastic used, more recyclable and eco friendly too.

CipherShield Collateral dual keys encrypted external hard drive safeguards and protect classified information when they are too important to be left in the hand of one individual. To gain access to the drive, authentication will be based on two unique Cipherkeys. It requires one master key to be plugged in and remove to activate the drive to be ready to authenticate with the user key. It is a higher-level two-factor authentication with a master key and user key. It is suitable for group settings where a manager is in control of the master key that must be used to activate the drive in readiness for the user key.

CipherShield design features a chip embedded in the access key which matches the AES encryption module on the controller board. The drive will automatically lock down its content once the key is unplugged, or the power is shut off. And without the access key, data will not be seen or accessed in the event of theft or loss of the external drive. Data stored on the hard drive are safeguarded by a hardware-based National Institute of Standards and Technology (NIST) certified industrial strength AES (Advanced Encryption Standard) cryptographic engine. The advantage of hardware encryption over software encryption is that you need not be concerned about Trojans/viruses or software upgrades, which results in a decrease in the total cost of ownership. You do not need to remember complicated passwords or PINs. Since CipherShield encrypts data independent of the operating system; removing the drive and connecting it directly to the SATA BUS will not defeat the encryption. Unit is bundled with four keys and registration is required for key duplication.

Feature

  • Provides maximum protection with access requirement of two keys
  • Collateral mode, a master key to activate, user key to authenticate
  • Bundled with two sets of unique Cipherkeys – a total of 4 keys
  • RAID 0 striping for faster transfer
  • 2 x 2.5″ drive inside for lower power and lighter weight
  • SSD drives inside for durability and shock resistance
  • USB-powered; power adapter optional
  • eSATA also powered by a USB cable
  • NIST FIPS 140-2 Level 2 compliant AES hardware encryption with 256-bit encryption
  • Conforms to HIPAA regulation regarding patient privacy and Sarbanes-Oxley regarding corporate financial and accounting practice
  • CipherShield Smart Insert technology with Cipherkey to authenticate the drive, no complicated password or PIN to remember
  • FDE (Full Disk Encryption) encrypt the whole drive
  • Real-time “on-the-fly” encryption without any performance degradation
  • Faster, easier to use, and provide better security than software encryption
  • Operates independently to the OS: does not require separate drivers
  • The encryption key is on the removable hardware key; can be removed and stored away to prevent unauthorized access
  • Plug and play; no complicated installation
  • Transfer rate:
    • USB 3.2 Gen 2 10 Gbits/s
    • eSATA 6.0 Gbits/s
  • Drive: Pre-formatted NTFS SATA drive (usable in PC & Linux, need to reformat to use in Mac)
  • TAA compliant
  • Item dimension: 8.25″ x 5.5″ x 1.75″
  • Item weight: 1.9lb
  • Shipping dimension: 9.63″ x 6.82″ x 4″
  • Shipping weight: 4lb
  • ECCN: 5A992.c
  • HTS: 8471705065

System Requirement

  • USB 3.2 Gen 2 10Gbps SuperSpeed+ port
  • Compatible to previous generations USB port but will only run at maximum speed for that port
  • eSATA port with AHCI mode to support hot-plug
  • USB-powered
  • Mac OS X 10.4 or later
  • Microsoft Windows 10, 8, 7, Vista, XP
  • Windows Server 2019, 2016, 2012, 2008, 2003. Does not work with 2000 Server
  • Linux
  • 2TB or smaller will support Windows XP; larger than 2TB requires GPT support and does not support Windows XP

Package Content

  • CipherShield dual keys RAID 0 256-bit AES USB 3.2 Gen 2/eSATA encrypted external desktop SSD drive
  • 4 Cipherkeys
  • USB 3.2 Gen 2 A to B cable
  • eSATA cable
  • 12V 1.5A DC Full range switching power adapter
  • User manual