A Global Silicon Electronics, Inc. Company
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Search in posts
Search in pages
products
Filter by Categories
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Search in posts
Search in pages
products
Filter by Categories
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Search in posts
Search in pages
products
Filter by Categories

Categories

HomeBase Drive Installation

HomeBase Drive Installation

Note: 5TB HDD requires HomeBase firmware version 3.6.1.4 or newer. Please update your HomeBase firmware to the latest version if the formatting gets stuck or fails.

  1. Power off HomeBase before installing the drive.
  2. Remove top lid. Push down and remove the lid.
  3. Remove the screw on the top holding down the drive tray. Pull up the tray to remove it.
  4. Place the drive in the tray and use the 4 screws that came with the HomeBase to screw in the sides of the tray.
  5. Insert back the assembled tray into the HomeBase unit.
  6. Replace the screw holding down the tray. Replace the top lid.

Use the HomeBase app to connect to the hard drive under HomeBase->Storage Management->Storage-> HD. You must format the drive before the video recordings can be stored on the drive.